01
Material Identity
Compare incoming material references, surface appearance and applicable specifications with the approved purchase or sample direction.
Quality Control
Quality Checked Against Approved Requirements
Quality is not a single final inspection. Material, measurements, seams, branding and packing must be checked against the approved sample and relevant specifications at appropriate stages.
Quality Checkpoints
Quality Checkpoints
02
Measurement Review
Measure selected points according to the approved measurement chart and agreed tolerances. Record any deviations requiring review.
03
Seam & Construction
Check seam appearance, construction alignment, panel matching and relevant stretch-sensitive areas against approved references.
04
Garment Function Details
Review pockets, zippers, drawcords, liners, cuff or hem openings and other functional components specified for the style.
05
Artwork & Labels
Compare logo dimensions, color direction, placement and main/size/care labeling with approved artwork and placement notes.
06
Appearance & Finishing
Review visible defects, thread ends, cleanliness, finishing and shade consistency to the agreed acceptance requirements.
07
Set Matching & Size Assortment
For coordinated sets, review top/bottom pairing, color combinations, sizing and packing rules.
08
Final Packing Review
Confirm individual packing, quantity, size identification, labels and carton information against shipment instructions.
Inspection Basis
What Each Check Is Based On
Records are kept as agreed for each project.
Factory & Production| Checkpoint | Basis | Supporting Record |
|---|---|---|
| Fabric | Approved material and batch information | Fabric specification, batch records |
| Measurements | Approved size chart and agreed tolerances | Measurement records |
| Seams & Construction | Approved sample and technical documents | Construction detail photos |
| Branding & Labels | Confirmed placement and artwork | Label and logo placement photos |
| Final & Packing | Packing and shipment requirements | Inspection and packing records |
Sample Baseline
Measurement Chart Against the Approved Sample
Example structure only. Points of measure, specifications and tolerances are set per style and per measurement point; no universal figure is assumed here.
| Point of Measure | Approved Spec | Tolerance | Sample | Bulk Check |
|---|---|---|---|---|
| Chest Width | Per approved chart | Agreed per point | Recorded | Recorded |
| Body Length | Per approved chart | Agreed per point | Recorded | Recorded |
| Sleeve Length | Per approved chart | Agreed per point | Recorded | Recorded |
| Waist (Relaxed) | Per approved chart | Agreed per point | Recorded | Recorded |
| Inseam | Per approved chart | Agreed per point | Recorded | Recorded |
| Hem / Leg Opening | Per approved chart | Agreed per point | Recorded | Recorded |
Yes. It supports checks together with approved specifications, measurement requirements and agreed acceptance criteria.
No. Measurement tolerances should be agreed by product and measurement point; no universal figure is assumed here.
Testing depends on the claimed property, method, material and project scope; results should be reviewed before any performance claim is published.
